Inicio > Products > Evaporative industrial air coolers > AD BIG PREMIUM - Evaporative air coolers with centrifugal fan from 18,140m3/h to 36,678m3/h to cool and renew the air in industrial premises.

AD BIG PREMIUM - Evaporative air coolers with centrifugal fan from 18,140m3/h to 36,678m3/h to cool and renew the air in industrial premises.

Parameters

Airflow

18.140 to 36.678 m3/h

Heating capacity

300 to 615 m2

Air delivery position

lower (V), lateral (H) or higher (VS)

Downloadable documentation

Catalog

Sketchup

Industrial evaporative coolers from 18.140 to 36.678 m3/h

Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its humidity.

Once this process has been carried out, the air is propelled inside the premises to be air-conditioned and, based on the appropriate renovations and extraction of air, a comfortable comfort temperature and adequate indoor air quality are achieved for people.

AD BIG PREMIUM evaporative air conditioners, develop an air flow from 18.140 m3/h to 36.678 m3/h with an available pressure at a maximum flow of 100 Pa, its cooling capacity is suitable for premises from 300m2 to 615m2. For larger surfaces more units can be installed.

Its operation is totally ecological due to the fact that no type of refrigerant gas is used in addition to requiring 80% less electrical energy compared to conventional air conditioning equipment.

Another aspect to keep in mind is the constant renewal of indoor air that guarantees eliminating stale environments of odors and fumes.

Instalation

The installation of evaporative air conditioners consists of a single-phase or three-phase electrical connection depending on the selected model, a mains water connection, support bench, electrical control panel and air diffuser elements or ductwork.

Its maintenance consists of carrying out an annual review of the cooling panels and a general cleaning of the equipment.

Characteristics

Water tray made of thick polyamide with UV protection.
Upper roof and suction grids in galvanized steel, oven-painted with RAL 7035 gray polyester paint.
Posts made of AISI-304 stainless steel
Chiller panels type 5090, 100mm thick.
Centrifugal fan group in galvanized steel (with hot-dip galvanized frame).
Automatic emptying system patented by MET MANN.
Factory connected hydraulic and electrical installation.
Support and bearing with FAG DUROTEC anti-corrosive treatment.
Base bench with legs for easy transport and installation.
GATES QUADPOWER V-Belts.
WILO water pump.
IE3 high efficiency electric motors.
Quick opening of the panels with half-turn fasteners.
Possibility of supply with ceiling and panels in AISI-304 stainless steel.
They can be supplied with filtering systems to comply with the BRC food standard, ATEX motors, etc.