With more than 50 years of experience in the manufacture of hot air generators, we are pleased to present our new FAST DRY division aimed at providing solutions for drying, dehydration and pest control processes.
- About us?
We are manufacturers of hot air generators intended to cover the thermal needs in drying, dehydration and pest control processes in the industry.
- What do we do?
We provide solutions where a hot air system is necessary to carry out drying at low, medium and high temperatures. We have equipment with a maximum power of 500 kW operating on gas or diesel with thermal jumps from 20ºC to 250ºC. The air provided by the equipment can be at low, medium or high pressure.
- How we work?
Upon receiving a project request, we collect the main data and analyze the feasibility of the project. At the moment that we can provide a solution, we provide a project reporting the main components that we believe are necessary: heat generation, ventilation group, filter group, humidification and system control. At all times we offer technical support in the different phases of project execution.
- Who are we addressing?
Our equipment is intended for manufacturers of drying systems, dehydration, paint booths or all types of processes where a system is required to accelerate drying in any type of industrial or food process.
APPLICATIONS
- Fruit tunnel drying
- Drying for dehydration of food products
- paint booths
- Metal surface treatment
- Cork drying
- Disinfection and pest treatment
- Case of success
-
Initial problem
We received from a client dedicated to the manufacture of sandwich panels a production problem due to the slow drying process of one of the parts of the manufactured product, which caused a slow and expensive production process.
- Proposed solution
Once all the technical information on the type of product, amount of water to be dried and physical and finishing characteristics of the product had been compiled, our technical department proposed the application of a hot air supply unit with a thermal difference of 120°C with an air flow and pressure suitable for the type of drying tunnel and air supply nozzles. At the product completion level, a filtration module was recommended to prevent the treated air from carrying dust particles that could affect the correct completion of the finished product. The equipment in this case was supplied with a two-stage diesel burner and a control panel to manage the entire operating process and safety components.
- Obtained result
The results obtained once the commissioning was completed were a 50% increase in production with a minimum of energy consumption thanks to the high performance of our heat production equipment.